Color name: Cut clear (MSP)
Size: 18inch 8.5J +42 5H-114.3
With standard center cap

Color name: Matte black (MBL)
Size: 18inch 8.5J +42 5H-114.3
Matte black center cap (can be changed free of charge when ordering)

Dimples are inserted horizontally between cosmetic bolts to make the spoke look directional and look with three-dimensional effect. A lot of detailed modeling is reminiscent of a very complex design.

A composite design separates the inner mesh area and the outer ring.
The mesh design with many cross section is proof of the old school design.

The intersection of the mesh part is divided into large and small in order to make the number of intersections within the small diameter large and to make it elaborated.
PCD holes seat as low as possible to enhance three-dimensional look.
You can select matt black center cap with no extra cost.
The newly set WORK logo center cap is also available as an option. (See below)

The center cap can be changed as an option.

No extra charge for a choice of matt black center cap.
Retail price for W logo silver cap (ESS)= +4,400 yen/each
Retail price for Black / W logo and Red / W logo= ¥3,300/each.
Retail price for Copper clear center cap= +2,200 yen / each sold with a combination of Cooper color center finish.

Buff alumite rim (standard setting)

COP: Rim Arrange
Cut anodized rim

COP: Rim Arrange
Bronze anodized rim

COP: Rim Arrange
Matte bronze anodized rim

COP: Rim Arrange
Black anodized rim

COP: Rim Arrange
Matte black anodized rim

COP: Rim Arrange
Brushed rim

Center disk= 6 colorism and 5 colorism clear is available.

Click here for colorism option.

[Above] 18 inch 7.5J inset +50 (A-Disk) rim depth 44mm
[Bottom] 18 inch 9.0J inset +38 (A-Disk) rim depth 75mm

The face will not poke out from the outer rim flange even the rim depth is 44mm (narrowest outer rim).
If the rim depth is 75mm, it will be able to shine from the upper rim of the step rim.